Using a Buttonhole Foot on a Brother HF37, XR37NT or XR27NT
A neat row of buttonholes is a satisfying finishing touch to a shirt or dress. The right buttonhole foot helps make the openings consistent; a quick test with the actual button and the same fabric layers is time well spent before sewing the garment.
Fit the foot safely
Switch off or disconnect the machine as the manual instructs. Raise the needle and presser foot, then use the specified release and attachment method. Do not force a foot sideways or assume the presser-foot lifting lever is the foot-release mechanism.
Prepare the buttonhole
Mark the position and test on an offcut using the same layers and appropriate interfacing. Set the button holder or length as the instructions require, select the buttonhole and put the buttonhole lever in its required working position where applicable.
Make a complete test
Follow the manual's threading, starting position and sewing sequence. Guide without pulling the fabric and check the button fits before cutting the garment's buttonhole. Different buttonhole systems can have different steps.
Open it carefully
Remove the work and cut the opening with a suitable tool, keeping clear of the stitched ends and your fingers. A neat test hole is worth the extra time before making an irreversible cut in the garment.
Find the exact manual at Brother support, or contact Fabric Mouse with the machine model and foot details if you need help.